| Unit Weight |
Unit: 12.5 kg (27.5 lb)
Power Supply: 11.0 kg (24.0 lb)
Waste Receiver: 6.0 kg (13.0 lb)
|
| Method |
ASTM D445/D446, IP 71, ISO 3104/3105, SAE J300 |
| Dimensions (W x D x H) |
Unit: 25.4 cm × 30.5 cm × 59.8 cm (10.0 in × 12.0 in × 23.5 in)
Power Supply: 33.0 cm × 39.6 cm × 17.2 cm (13.0 in × 15.6 in × 6.8 in)
Waste Receiver: 33.0 cm × 39.6 cm × 17.2 cm (13.0 in × 15.6 in × 6.8 in)
|
| Shipping Dimensions (W x D x H) |
74.0 cm × 64.0 cm × 92.0 cm (29.0 in × 25.0 in × 36.0 in) |
| Shipping Weight (With All Items) |
64.0 kg (140.0 lb) |
| Maximum Throughput |
12 tests per hour |
| Sample Capacity |
1 |
| Viscosity Range |
0.5 mm2/s (cSt) to 10,000 mm2/s (cSt) in 100-fold increments (depending on viscometer tube selection). Fast run tubes are also available. |
| Timing Resolution |
0.01 s (timing accuracy to ± 0.001 s) |
| Temperature Range and Accuracy |
20 °C to 100 °C,± 0.01 °C (temperatures within 5 °C of ambient and below require bath cooling)
Down to 15 °C,± 0.03 °C (temperatures within 5 °C of ambient and below require bath cooling)
|
| Minimum Sample/Solvent Volume |
5 mL sample/15 mL solvent per test (as little as 3 mL with fast run tubes) |
| Operating Conditions |
15 °C to 30 °C,10% to 75% relative humidity (non-condensing),Installation Category II; Pollution Degree 2 |
| Electrical Specifications |
100 Vac,50/60 Hz; 115 Vac,50/60 Hz; 230 Vac,50/60 Hz; 1000 watts power consumption |
| Compliance |
CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc,60 sec.); ROHS |
| Additional Standard Features |
Internal heated waste drain lines,dual solvent input |
| Data Output |
RS-232 via DB-9 connector |
